sales@fortex.co.uk +44 (0) 1522 718 168
Dry Film Roll Laminator Model 610
View cart “Dry Film Photoresist Sheet Laminator Model 304” has been added to your cart.

Dry Film Roll Laminator Model 610

£3,995.00

Dry Film Laminator Model 610 is a production grade laminator are for double and single sided sided laminating of all types of polymer film photo resists to the clean surface of a wide variety of substrate materials including FR4 copper laminates, brass and steel and chemically milled components.

The Dry Film Laminator Model 610 is a production grade Laminator specially developed for the simultaneous Double or single sided  laminating  of all types and thicknesses of commercially availble Photo polymer dry film resists to the clean surfaces of a wide range of substrate materials that are used in Photo chemical metal etching,  including PCB FR4 copper laminates, flexible laminates, Ceramic Wafers (Round/Square), stainless steel, Brass, Silver etc.  The GX24 Dry Film roll Laminators are widely used for laminating in both small and large industrial plants as well as for research and development facilities and Colleges and Universities.  Additionally the machine is also suitable for wet Lamination.

This Dry film  laminator uses accurate Infrared temperature sensors to  accurately measure the roller temperatures.  The rollers use infrared heater technology and they have adjustable feed speed to simultaneously  laminate both sides of the substrate material with dry film photo resist as well as automatically removing the polyofin separator sheet on to take off rollers.  As the pressure control of the rollers is independently adjustable of the laminating speed, temperature and tension solder mask application is also possible.

  • Up to 9 Exclusive pre-set temperature and speed setting programs can be stored for a variety of applications just by pressing a button on the digital display panel.
  • Capable of simultaneous double sided or single sided laminating with take off rolls automatically removing removing the polyolefin release liner
  • Optional stand with castors for ease of moving
  • Clean room class compatible
  • Warm-up time only 10 minutes due to the Infrared heater design which gives uniform heat distribution across the dual Fusion heat rollers as well as improved temperature control.
  • Replaceable internal  infrared roller heaters
  • Heavy duty motor with regenerative motor drive featuring hardened steel roller /sprocket drive train
  • Accurate digital readout back lit display of roller temperature and speed allow operator to easily adjust settings
  • Transparent roller cover with magnetic latch and safety interlock for easy removal and safety
  •  Non contact Accurate real-time Temperature read out from  an infrared sensor which also provides real time feedback to the micro controller
  • Adjustable override controls for both temperature and speed to compensate for variations in material or conditions.
  • Optional footswitch for ease of operation
  • Loading and Unloading safety clutch to facilitate Easy fast mounting of dry film resist rolls
  • Independent top and bottom Adjustable film tension controls
  • Separate dual pull rollers for ease of transport of laminates with no creasing of film
  • Heavty duty automated clutch on motor drive mechanism for safety
  • Detachable transport table for ease of access with adjustable fence for ease of feeding in material accurately
  • One touch Reverse function to allow easy cleaning of rollers and for Panel alignment
  • Ready and Wait visual and audible signals alert operator to laminator readiness thus reduces errors.
  • Dual Heater roller and dual pressure roller construction (Shorr hardness 60) in high grade Silicon rubber allows precision balanced roller pressure across the full width of the panel, with Incremental roller gap adjustment ensuring correct pressure for laminating panels and flexible substrates from 0.1mm up to 5 mm thick.
  • Dry Film Laminator starter kit available

 

Dry Film Laminator Specification
610 Model
Maximum working width

 

Minimum Material Thickness

Maximum Material Thickness

Maximum Material Length

Optional Stand

Lamination Pressure

620 mm (24.5 “)

 

0.1 mm (0.003”)

6.35 mm (1/4”)

Infinite

Yes

Adjustable in 6 steps

Temperature range

 

 

Cooling System

Internal Film core size

Max Length film

0 – 130 °C (0 – 266°F)

Optional 0-153 °C (0 – 307°F)

 

Blower

76mm (3 Inch) core (6″ size adapter kit available by request)

150m (500ft)

Lamination speed 0 – 1.6 m/minute (0-5 fpm) variable in 10 stages
Power Requirements 220/240 Volt 50 Hz Single phase 7.8 amps (1800 Watts)

60Hz by request 120VAC by Request

Machine Dimensions

Shipping dimensions

Width 900 mm (35.4″) x Depth 580 mm (22.8″) x Height 600 mm (23.6″)

Width 1050 mm (41.3″) x Depth 700 mm (27.5″) x Height 600 mm (23.6″)

HRL Laminator Shipping weight 49 Kg (108 lb)

 

 

Ancillaries