Home About us Products Service Request Enquiry Form Contact us Single & Double Sided UV Exposure Units With Vacuum, Single Sided Exposure Units For the ultimate in reproduction definition, a vacuum unit has to be the choice. Unlike other pressure pad units the FORTEX series of exposure units uses a vacuum to ensure the artwork and material to be exposed are held in perfect contact. When fine tracks are required on a PCB or detailed definition on a graphic reproduction, a vacuum unit should be chosen. The 0 - 999 second digital timer is then set via the touch membrane control panel and the start button pressed, this activates the integral vacuum pump, which removes the air from the chamber ensuring perfect contact between artwork and material to be exposed. Only when a vacuum has been achieved will the tubes activate and the exposure commence. When completed the vacuum pump is turned off and a valve automatically releases the vacuum allowing the lid to be raised. These units are manufactured from aluminium, but due to its larger size case the largest unit ( AY 380 ) is made of steel. All units come complete with an IEC socket and moulded 13-amp plu Specifications       Model AY 315 UV Output 6 x 15W Working Area 13" x 14" (330 x 355mm) Dimensions 550 x 485 x 170mm     Model AY 321 UV Output 6 x 20W Working Area 13.8" x 21" (350 x 535mm) Dimensions 720 x 580 x 170mm     Model AY 360 UV Output 10 x 20W Working Area 22.6" x 26.8" (575 x 680mm) Dimensions 765 x 730 x 178mm     Model AY 380 UV Output 12 x 20W Working Area 20.4" x 36.5" (520 x 927 mm) Dimensions 890 x 1031 x 215mm Double Sided Exposure Units A double-sided exposure unit is an essential tool for the production of double-sided PCBs. The ability to expose both sides of the board at once eliminates the immense problem of artwork registration for two separate exposures on a single sided unit. These units are similar to the single sided range that instead of a solid metal base, the lid closes onto a clear Perspex base, beneath which is located, another set of UV tubes. Also, in place of the optical filter above each tube the AZ units have a fibre optic connected to a display on the front of the units. This display panel gives a visual confirmation that each tube is working correctly during exposure. Like the single sided units these models have a 0 -999 digital timer and the cases are manufactured from aluminium but also due to its larger size the case unit ( AZ326 ) is made of steel. Both come complete with an IEC socket and moulded 13-amp plug. Specifications       Model AZ 210 UV Output 8 x 15W Working Area 10.2" x 14" (260 x 355mm) Dimensions 550 x 485 x 170mm     Model AZ 220 UV Output 12 x 20W Working Area 13.8" x 21" (350 x 535mm) Dimensions 720 x 580 x 170mm     Model AZ 326 UV Output 24 x 20W Working Area 20.4" x 36.5" (520 x 927mm) Dimensions 890 x 1031 x 215mm Make an enquiry Return to the previous page Fortex, 15-17 Fleetwood Rd, Leicester, LE2 1YA, England Tel: +44 (0) 116 2708 937 - Fax: +44 (0) 116 2700 532 - Email: sales@fortex.co.uk © 2005 Fortex / PC Drills Limited, All Rights Reserved - Web site designed by Opem Solutions.

Printed circuit boards production equipment for small and large producers of PCB’s. Produce chemically engraved metal plates, chemical milled components and printed circuit boards with the production equipment manufactured by Fortex. For three decades Fortex has manufactured equipment and have been continuously working to improve our own very high standards to meet your needs of reliable and value for money equipment to produce both PRINTED CIRCUIT BOARDS, CHEMICAL MILLED and METAL ETCH COMPONENTS. If you require equipment to produce Chemically Engraved metal plates, printed circuit boards, and chemically milled components then please browse the Fortex range of products.