|
|
|
 |
 |
|
|
|
|
Two Speed PCB Routing & Drilling Machine,
The FORTEX high speed Printed Circuit Board Router is of robust steel and aluminium construction, with a work illuminating lamp, large base plate, key type chuck, fence and depth stop. Polarising key cutouts in edge connectors, square forming for edge connector corner clearances, cut outs for relays, etc., and can be machined by use of the adjustable fence and depth stop. Complicated contours can be shaped from a master by use of 1/8 inch ( 3.175 mm ) diameter router cutter enabling identical reproduction of the master profile. Unwanted tracks can easily be removed or broken on the prototype circuit board by routing and by use of the adjustable height setting on the spindle unit. Rough edges on circuit boards can also be chamfered by the use of an angle cutter and the fence in the side position thus allowing any size of board to be chamfered.
| Spedification |
|
| Motor |
Continuously rated |
| Voltage |
200 - 250 volts A.C. |
| Rating |
100 Watts |
| Suppression |
TV and radio suppressed |
| Throat Clearance |
6 inches (150mm) |
| Chuck Capacity |
0 to 5/32 inches
(0 - 4mm) |
| Height Under Chuck |
1 3/4 inches (44mm) |
| Length |
16 1/2 inches (420mm) |
| Height |
15 1/2 inches (400mm) |
| Width |
8 inches (200mm) |
|
Fortex, 15-17 Fleetwood Rd, Leicester, LE2 1YA, England
Tel: +44 (0) 116 2708 937 - Fax: +44 (0) 116 2700 532 - Email: sales@fortex.co.uk
|
|
|
|
|
| © 2005 Fortex / PC Drills Limited, All Rights Reserved - Web site designed by Opem Solutions. |
|
|
