Conveyorised Spray Processors,


Chemical Processors
  • Modular construction
  • Optional larger input/output conveyor
  • Inspection module for joining conveyors to form process line
  • Variable spray pressure
  • Full safety features
  • Digital temperature control
  • Low maintenance requirement
  • Double filtration of chemistry
  • Low voltage control circuit
Process Applications
  • Etching
  • Dry film developing
  • Dry film stripping
  • Processing materials from 6mm down to 0.1mm
  • P.C.B. width 500mm (20") or 300mm ( 12” )


General Specification  
Model 500  
Description Chemical spray processor including mains water rinse
Model Bench or Stand Module
460mm process chamber
295mm mains water rinse chamber
Spray bars top 4 process chamber, 1 rinse chamber
bottom 4 process chamber, 1 rinse chamber
Nozzle type Poly v-jet
Nozzles per tube 5 + 6
Pressure indication Optional extra
Pressure control Adjustability over full operating range
Re-circulating pump 0.75kW magnetic drive centrifugal pump
Conveyor drive Worm and wheel
Conveyor drive motor Variable speed d.c. shunt wound motor
Speed range 0-2 metres/minute
Speed direction Optional
Heater 1 x 2kW Titanium
Temperature range Ambient to 50°C ± 1°C
Controller Digital (standard)
Cooling Factory built optional extra
Sump capacity 90 litres max
50 litres min
Liquid low level and shut down Warning lamp
Construction materials P.V.C.,Titanium, Hyperlon, PE1000, Vinylester, H.M.P., P.V.D.F.
Lids Glass inner and outer with P.V.C. seals
Covers P.V.C.
Safety switches Reed magnetic on outer lid
Voltage 220/240v 50Hz (13A plug)
Dimensions Height 780mm (31in)
Width 935mm (37in)
Length 1040mm (41in)
Mounting Frame Polypropylene box section (Optional extra)


General Specification  
Model 300  
Description Chemical spray processor including mains water rinse
Model Bench or Stand Module
460mm process chamber
295mm mains water rinse chamber
Spray bars top 4 process chamber, 1 rinse chamber
bottom 4 process chamber, 1 rinse chamber
Nozzle type Poly v-jet
Nozzles per tube 3 + 4
Pressure indication Optional extra
Pressure control Adjustability over full operating range
Re-circulating pump 0.5kW magnetic drive centrifugal pump
Conveyor drive Worm and wheel
Conveyor drive motor Variable speed d.c. shunt wound motor
Speed range 0-2 metres/minute
Speed direction Optional
Heater 1 x 2kW Titanium
Temperature range Ambient to 50°C ± 1°C
Controller Digital (standard)
Cooling Factory built optional extra
Sump capacity 44 litres max
34 litres min
Liquid low level and shut down Warning lamp
Construction materials P.V.C.,Titanium, Hyperlon, PE1000, Vinylester, H.M.P., P.V.D.F.
Lids Glass inner and outer with P.V.C. seals
Covers P.V.C.
Safety switches Reed magnetic on outer lid
Voltage 220/240v 50Hz (13A plug)
Dimensions Height 645mm (26in)
Width 790mm (31in)
Length 1040mm (41in)
Mounting Frame Polypropylene box section (Optional extra)



Make an enquiry Return to the previous page


Fortex, 15-17 Fleetwood Rd, Leicester, LE2 1YA, England
Tel: +44 (0) 116 2708 937 - Fax: +44 (0) 116 2700 532 - Email: sales@fortex.co.uk

© 2005 Fortex / PC Drills Limited, All Rights Reserved - Web site designed by Opem Solutions.  


Printed circuit boards production equipment for small and large producers of PCB’s. Produce chemically engraved metal plates, chemical milled components and printed circuit boards with the production equipment manufactured by Fortex. For three decades Fortex has manufactured equipment and have been continuously working to improve our own very high standards to meet your needs of reliable and value for money equipment to produce both PRINTED CIRCUIT BOARDS, CHEMICAL MILLED and METAL ETCH COMPONENTS. If you require equipment to produce Chemically Engraved metal plates, printed circuit boards, and chemically milled components then please browse the Fortex range of products.